REAR SWAY BAR ENDLINKS
Application IS300, GEN1 IS, Altezza, IS200 , GS300 GS400 GEN2 GS / Aristo/ JZS160/161, JZX110
Version: 2.0 - upgraded rod ends and press in stud on mount end.
ROD END TYPE: 3-P FK Rod ends, Teflon lined, Precision series.
Includes a pair of endlinks
-Allows preload adjustment when lowered or with aftermarket sway bars.
-Replaces bent or loose factory endlinks from lowered vehicles
-Shorter than stock endlinks
-Measure the endlink length to make the sway bar pickup point flat with its bushing (0 preload) when the vehicle is loaded.
-Adjust the linkage to that length and mount, setting the jam nut.
-The stud is press fit to the rod end and has 2 flats on it. The 2 nylon washers are intended to be preloaded but do not over-tighten. We suggest 24ft-lbs or a 1/4 turn past fully mated.
IS300 / GEN2 GS REAR SWAY ENDLINKS
- Brand: FIGS Engineering
- Product Code: IGS300RRSWAY-ELV2
- Availability: In Stock