These bushings replace the staked rubber bushings on the Front Upper Control arms of the ISX50 platform(that is IS250, IS350 and IS-F) and the Gen3 GS. These also allo camber adjustment by clocking them at install time. Offset inward to add camber and out to subtract (increase negative.) Range is +/- 0.5 degrees of camber adjustment.
Set includes 2-Bushing sets for to replace both arms. We will be working on more pics and an install guide.
A bearing C-Clamp is strongly suggested for ease of install. The factory arms removes easily with a ball joint service tool and removal of the two 12mm bolts on the inboard side.
Our install write up is here.
Unbolt UCA via two inner bolts and separate the outer ball joint with a ball jount separation tool.
Support spindle with a coat hanger or tie down to the shock body.
Remove old bushing via any means possible but most effectively using a bearing clamp.
Lube new poly bushing and press in first, fill voids and coat the lead in transition.
Press in Complete Bearing cup
Press in cylinder shaft second noting which adjustment you would like: Inward, outward, Neutral up or Neutral Down.
Remount the UCA and retorque ball joint and inner bolts.
FREE SHIPPING IN US
GEN2 IS ISX50 GEN3 GS FRONT UPPER CONTROL ARM OFFSET POLY BUSHING CAMBER ADJUSTMENT
- Brand: SuperPro
- Product Code: ISX50_BSH_UCA_SP3507_XK
- Availability: In Stock