EVERYTHING YOU NEED TO START YOUR TURBO BUILD!

Does not include a turbo, but please contact us if you need assistance in turbo selection.

Treadstone Manifold Features:

• Uses any 2 bolt wastegate kit includes 2 bolt to MVR44mm wastegate adapter for larger WG.
• Cad designed and investment cast from bulletproof 347 stainless steel. The high thermal inertia and excellent heat retention of cast 347 stainless steel provides the turbocharger with as much thermal energy as possible. This effect raises the overall efficiency of the system and produces results superior to tubular/welded manifolds.
• 347 stainless steel is virtually impenetrable to rust and other forms of corrosion and will stay looking beautiful for years to come. No more rusting looking turbo manifolds!
• Manifold uses M10 X 1.25 thread pitch short studs.

Tial BOV Features:

• For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.). The body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in (50.5mm) valve.
• The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp uses Stainless Steel hardware for a long-lasting, corrosion-free appearance.
• The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance.
• The Blow Off Valve also comes with our own machined aluminum banjo-type air fitting and bolt, with an oversized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life.
• An aluminum or mild steel weld base mounting flange is furnished with each unit. Stainless Steel is available at an additional cost. The use of 6061 aluminum allows the housing to be anodized with a selection of colors.
• Through countless hours of R&D we were able to make the same size valve flow a staggering 60% more than the original design - that means 60% more air is blown off per cycle! This is the highest flowing BOV on the market.
• Color anodized aluminum options (Silver, Red, Blue, Purple, Black).
• A single Q BOV can support up to 1,800hp
• -2psi spring for supercharged applications

Tial Wastegate Features:

• High temp NiCrFe based alloy valve and 316SS valve housing offer longer product life compared to competing designs.
• High temperature silicone Nomex reinforced actuator diaphragm.
• 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature and resists "relaxing" up to 900F (483C).
• Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.
• All Stainless Steel hardware.
• Mating weld flanges are 304L
• Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black).
• 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports.
• Ultra compact design fits in very tight spaces
• V-Band inlet and outlet make install easy, flanges and clamps are in the box!
• Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized.
• Extreme high temp casting available for Motorsport applications
• Optional valve position sensor available for purchase in a MV-R assembly or in an actuator kit to adapt to standard MV-R.  See images below for reference.

Injector Dynamics Injector Features

• ID1050XDS supports min 1020cc/min flow at 40psid and boost pressures over 30psi in E85. Plenty of headroom for your future build
• Corrosion-resistant internals makes it compatible with all known fuels, capable of extended service life with corrosive fuels.
• Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors.
• Improved internal flow path increases output by 5% without sacrificing low flow performance.
• The stronger magnetic circuit offers stable operation up to 10 bar.
• Replaceable inlet filter extends service life.
• Refer to manufacturer Specs HERE

Radium Rail Kit

• -8AN bore to support any single rail fueling requirements.
• Complete with ORB fittings and plugs to suit return or returnless systems.
• Comes with a fuel rail mounted low profile pulse damper.